|
Products center |
|
|
FLOOR-TYPE FACE MILLING MACHINE MODEL X3822 |
|
This machine is designed as an integrated structure. The column slide moves horizontally along bed guideways. The milling head slide moves vertically along column guideways and it also can move axially (can be operated manually or mechanically). So, it can satisfy the machining range of work-piece. The vertical and horizontal movements of milling are driven by a DC motor or a frequency conversion motor through the feed box, then, transformed by the electromagnetic clutch, so as to realize stepless feeding and rapid moving in two coordinate directions. The speed of axial mechanically moving and feeding of the milling head is reduced through gearbox by a frequency conversion motor, so, stepless feeding is realized(25~200mm/min). This machine can be used for machining horizontally the bottom face of large-sized motor set. It can also be used for milling surfaces and slots, boring and drilling holes on the extreme long and high work-pieces. The square holes or sides can be machined by the angle milling head accessories. The milling head of this machine is the standard model ITX40 or milling power unit is the model LTX32.
|
Main specifications:
Taper hole of milling arbor |
ISO 50# |
diameter of milling arbor end |
128.57 |
Spindle speed |
80~400 (8steps) |
Power of spindle motor |
5.5 (7.5) |
Max. torque of spindle |
560 (970) |
Transverse travel of column |
4000(can be extended) |
Vertical travel of spindle box |
2200,2500 |
Axial travel of spindle |
400+80(sleeve) manual |
Total power of motor |
13.5 |
Weight |
18 |
Overall dimensions |
7800×1640×4600 | |
|