|
Products center |
|
|
DOUBLE COLUMN VERTICAL LATHE MODEL C5225 |
|
Double Column Vertical Lathe C5225 is a standard model in series specifications. It is widely used in the field of metallurgical, chemical, motor manufacturing, mine, ship-building, iron & steel, military engineering industry. This machine can be used for turning inside and outside cylindrical surface or taper surface of large work-pieces. This machine has been ameliorated on the following aspects: 1. The main parts of the machine have been strengthened: columns are widened, base and table are thickened, and the machine weight is 5 ton heavier than that of same specification vertical lathe. So, the rigidity of whole machine is enhanced, especially when columns are lengthened for machining large size work-pieces. 2. The table is driven by a frequency conversion motor with high and low speeds shifted, so the speed can be changed steplessly. 3. Two double row short cylinder roller bearings are respectively mounted on upper and lower positions of the table spindle, so as to ensure the high accuracy when the cutting is performed at upper position of the work-piece, especially the large work-pieces. 4. The feed motion is driven by a frequency conversion motor via a clutch. The speed is changed steplessly. |
Main specifications:
Max. diameter to be turned |
2500 |
Max. height of work-piece |
1600(can be extended) |
Max. load on table |
10 |
Max. cutting resistance |
35000 |
Max. torque of spindle |
63000 |
Working table diameter |
2250 |
Range of table speed |
2~63 |
Horizontal travel of tool post |
1400 |
Vertical travel of tool post |
1000 (can be extended) |
Swing angle of tool post |
±30° |
Feed range of tool post |
0.25~90 |
Rapid movement of tool post |
1550 |
Max travel of cross rail |
1250 |
Power of main motor |
55 (frequency conversion) |
Machine weight |
37 |
Overall dimension |
5400×4560×4880 | |
|